FREE FILE
Ribbed Snap Box
Box and lid print in one piece with a working hinge, and the lid snaps shut with a crisp click.
print in placeboxsnap boxhingestorageorganizer
⬇ Download free (3 files)
Personal use. Want to sell prints? Commercial license.
❤ Show some love
Free files take days to design and test. If this one made you smile, buy me a spool.
Tips open soonCommercial license · $5
Sell printed copies of this design (Etsy, markets, your shop). One-time, forever.
Opening soonDetails & print settings
A clean, ribbed little box that comes off the print bed fully assembled – the hinge already moves, no screws, no glue, no pins to insert. The front tab snaps over a small ridge with a satisfying click, and an inner rim keeps the lid perfectly aligned. - Print-in-place hinge with 0.45 mm clearance everywhere, a flattened pin and teardrop holes so it doesn't fuse - Snap latch with a small pull grip – closes with a click, stays shut - No supports, no brim - The closing motion was simulated step by step in software – nothing collides - Great for SD cards, earrings, guitar picks, pills, screws, small gifts SIZES (closed, W × D × H) - S: 64 × 44 × 28 mm (inside approx. 58 × 38 × 25 mm) - M: 90 × 60 × 36 mm (inside approx. 84 × 54 × 33 mm) - L: 120 × 80 × 48 mm (inside approx. 114 × 74 × 45 mm) PRINT SETTINGS PLA · 0.2 mm · 3 walls · 15 % infill · no supports, no brim · print exactly as oriented in the file (both halves open side up). A well-tuned first layer (no elephant's foot) is important for the hinge. AFTER PRINTING Gently work the lid back and forth a few times until the hinge moves freely.
Files
- L/ribbed_snap_box_L.stl 925 KB
- M/ribbed_snap_box_M.stl 800 KB
- S/ribbed_snap_box_S.stl 737 KB